Swivel Chair Replacement Parts

Replacement Kitchen, Dinette, Tilt and Swivel

#402 Tilter, 5 1/4" x 5 1/4" screwholes Heavy Duty model
#502 Tilter, 5 1/4" x 5 1/4" screwholes Standard residential model
This was the original tilter swivel installed by Douglas, Cochrane, Ambassador, Keller, Tempo
and many others.
#4045 Chromcraft Tilter
6 1/2" x 7 1/4" screwholes
Fits all Chromcraft kitchen
and dining chairs perfectly.
Compare the difference
#402
#502
Thicker steel
Yes
No
Body height-without shaft/knob
2 5/8"
2 1/16"
Solid steel shaft
Yes
No
Shaft 1" diameter
Yes
Yes
Length of shaft
4 3/8"
4 3/8"
Shaft-pressed taper-(Factory)
Yes
No
Shaft welded in place
Yes
Yes
Sold steel pivot pin
Thicker
Thinner
Adjustable tension spring
Yes
Yes
Heavy duty tension spring
Yes
No
Weight
6 lbs.
4 lbs.
Residential service
Yes
Yes
Commercial service
Yes
No
402-heavt-duty-tilter
Part #402...$72.10
Chromcraft
120160
Part #502...$50.25
502-tilt-swivel-button
chromcraft=tilt-swivel-image
Click photo for size, price, plastic insert and schematic
image-of-plastic-inserts
Click photo to see what to measure!

It's not what you think.

How to remove and install KitchenTilters

How to measure a Plastic Insert

How to remove and install Plastic Inserts


See our Video for how to do all of above or click on each item instead
502A
170008
$6.95 Fit's most 1 1/2" outside diameter pipe
502B
170007
$8.95 Fit's most 1 3/4" outside diameter pipe
502C
170009
$10.60 Fit's most 2"-2 1/8" outside diameter pipe and all Chromecraft new and old
502D
170006
$12.10 Fit's most 2 1/4"-2 3/8" outside diameter pipe
502E $29.90 Fit's most 2 1/2" outside diameter pipe
The
inserts
(Heavy Duty) below are a thicker plastic
503B
$13.90 Fit's most 1 3/4" outside diameter pipe.
Black Heavy duty Vertical grooved.
503C
PP1084
$14.70 Fit's most 1 3/4-1 7/8" outside diameter pipe. White Heavy duty, Vertical grooved.
503F $28.10 Fit's most 2" outside (Chromcraft) dia. pipe. White Heavy duty, Vertical grooved.
Select plastic inserts below

Plastic Inserts

Ambassador uses #502B and #503B
Cochran
uses #502A
Chromcraft uses #502C or #503F
Callee uses #502E
Douglas mostly uses #502C
Hippopotamus only #131
Keller uses either #502B or #503B
Tempo uses either #502B or #503B or #502E
for all Others, click on photo above

Need Dinette chair casters for WOOD orTILE flooring?
All inserts have a 1" center hole to accept the 1" thick steel shaft

Quantity
We cannot guarantee measurements will be correct for your particular pipe dimension or wall thickness.