Swivel Chair Replacement Parts

Tilted swivel Bar stool, Kitchen, Dinette, Chair replacement parts

North America's only
Trendler Distributor
Is it Flat?

or

Is it
Tilted?

Measure mounting screw holes from edge center of one slot to same edge on another slot as in white arrow. Most will be 5 1/4"
Swivel mounting screws
Heavy large oval headed Phillips screws prevent common pull-through mounting problems.
Quantity
Style #6090... 0.80 package of 4
Glides
Round with square plate swivels 360°
Tilted bar stool chair swivels for Kitchen or Dinette chairs
Round plate has 4 threaded 1/4" bolt holes, 2 1/2" on centers to attach to leg frame or small steel plate.
swivel_round_and_square_plate
  • 3° degree tilt
  • Pre lubed & made in USA
  • 12 gauge steel plates
  • 12 steel ball bearings-Style #150T-Nylon race
  • 51 steel ball bearings-Style #153T 500 lb. load.
  • Uses style #901B hardened steel bolts
Specially for Style #150T and #153T. Serrated flange hardened steel Hex head type does not loosen nor pull through. 1/4" x 20 threads, 1/2" long. Will not interfere with ball bearings. Style #901B... $2.72 package of 4

Quantity
Round plate has 4 threaded 1/4" stud bolts 2 1/2" on centers to attach to the small steel plate. Seat plate is 7 3/4" with mountings at 5 1/4" screw to screw to perfectly replace all square plate installations without any modification.
round-sqaure-memory-swivel-plates
  • 3° degree tilt
  • Pre lubed & made in USA
  • 12 gauge steel plates
  • 12 steel ball bearings-Plastic race #149T
  • 51 steel ball bearings-No plastic race #147T
  • Positive 90 degree stops
Bar stools
Ice cream stools
Resturant counters
Beauty shop chairs
Pool and Patio-protected
Counter stools
Square plate swivels-360°

Quantity
Style #152BT...6 3/4" x 6 3/4" plates
  • 3° degreet tilt
  • Pre lubed & made in USA
  • 12 gauge steel plates
  • 12 steel ball bearings
  • Nylon race
  • 5 1/4" screw to screw mounting
square-swivel-turm-360-$31.10
Style #149T 12 Ball Bearings-Residential Duty

Style #147T 51 Bearings-Heavy Duty 500 lb load

Part #152BT...$27.95
Save more than $9.00 when purchasing a box of 16 swivels
Tilted Memory return bar stool chair swivels for Kitchen, Dinette chairs or Halls
Tilted bar stool and swivel chair
Style #163T...6 3/4" x 6 3/4" plates
Tilted bar stool and swivel chair Heavy duty
  • 3° degree tilt
  • Pre lubed & made in USA
  • 12 gauge steel plates
  • 51 steel ball bearings
  • Commercial duty 500 lb. load
  • No nylon race
  • 5 1/4" screw to screw mounting
tilted-swivel-comkmercial-duty
Memory return swivels 90° left and right
Part #163T...$34.10
Save more than $10.00 when purchasing a box of 16 swivels
Square seat plate is 6 3/4" with mountings at 5 1/4" screw to screw
Style #162T or #167T...6 3/4" x 6 3/4" plates
Tilted swivels with Memory return
Part #162T...$43.90
Part #167T...$48.75
7-inch-memory-return
Style #136T
Tilted
6 1/4" x 6 1/4" plates
  • 3° degree tilt
  • Pre lubed & made in USA
  • 13 gauge plates
  • 45 steel ball bearings
  • Heavy duty
  • No Nylon race
  • Residential use
  • 5 1/4" screw to screw mounting
"smaller"
bar stool and chair swivel
smalleer-swivel-136T
Quantity
Part #136T...$30.50
Wood leg swivel (has a bolt at top center of wood leg which protrudes up into swivel and fastens with a nut)
Style #164T
Tilted "Memory return" bar stool swivel. 90° left and right stops
6 1/4" important!
  • 3° degree tilt
  • Prelubed & made in USA
  • 12 gauge plates
  • 12 steel ball bearings
  • Nylon race
Quantity
attach-wood-leg-memory-retturn
Wood leg plate 8 1/4" square with
bolt hole to bolt hole centers
Top seat plate 7" square with 5 1/4" screw to screw centers
Style #157T
Tilted 360° wooden leg bar stool swivel
Wood leg plate 8 1/4" square with
6 3/8" important!
bolt hole to bolt hole centers
Top seat plate 7" square with 5 1/4" screw to screw centers
  • 3° degree tilt
  • Prelubed & made in USA
  • 12 gauge plates
  • 12 steel ball bearings
  • Nylon race
Quantity
attach-wood-leg
Part #157T...$40.70
Part #164T...$61.70
Style #166T
Tilted "Memory return" bar stool swivel. 90° left and right stops.
Wooden leg plate 8 1/4" square with
6 1/4" to 7 3/8" variable
bolt hole to bolt hole centers
  • 3° degree tilt
  • Prelubed & made in USA
  • 12 gauge plates
  • 12 steel ball bearings
  • Nylon race
Top seat plate 7" square with 5 1/4" screw to screw centers
Part #166T...$69.65
Quantity
attach-wood-leg-90-left-right
Best for Diners and Bars!
  • 3° degree tilt
  • Pre lubed & made in USA
  • 12 steel ball bearings-#162T Standard duty
  • 51 steel ball bearings-#167T Heavy duty
  • 90° left or right
  • 1" thick
  • 5 1/4" screw to screw mounting
  • Heavy duty 500 lb load
Quantity
Quantity
Page T1
Page T2
Page T3
Page T4
Page T5
Page T7
Page T8
Page T9
Page T10
Quantity
how-to-measure-a-swivel
Part #149T...$48.85
Part #147T...$53.60
Assembly hall organizations
6 3/4" plates
5 1/4" hole to hole centers
6 3/4" plates
5 1/4" hole to hole centers
6 1/4" plates
5 1/4" hole to hole centers
6 3/4" plates
5 1/4" hole to hole centers
5 1/4" hole to hole centers
Click for Rings
Part #150T...$33.20
Part #153T...$39.05

Quantity