Swivel Chair Replacement Parts

Gliders and Rockers

Swivel or chair gliders
Replacement, create, construct or adapt

To install style #18650 swivel and glider, there must be a minimum of 6" space for the glider (under) inside the chair bottom. Chair sides can be up to 34" in width.
The installer must provide 2 pieces of 3/4" thick by 3 1/2" wide hardwood installed securely front to back to attach the 2 glider flat steel plates.
All installations require a skill level of 8 on a scale of 10. 1 being easiest
View a factory installation drawing. Also see Glider Installation tips for more information.

swivel and glider with ring image
  • Swivel Glider rocker 250 lb. users weight
  • All steel with strong linkage
  • Painted Black
  • Glider rocking motion
  • Floor glides permanently attached
  • Overall sides height with ring-6 5/8"
  • Overall Glider width-14"

Swivel Glider not intended for large heavy chairs

Swivel and glide rocker options
  • Glider, 42 BB swivel (no ring) Style #18500...$157.70 $78.85
  • Glider includes heavy duty swivel, 24" steel ring and attachment hardware. Style #18650...$165.75
    Now $113.97

chair glider image
  • Overall height at sides, 7 1/2"
  • Height at side mountings 6"
  • Floor glides permanently attached
  • 250 lb. usees weight load
  • Overall width at linkage 21 7/32"

Unique parallel rocking motion similar to porch glider

Chair/Ottoman Glider Style #18700...$119.65 Now $97.30
See Glider Installation tips


Style #18219S with 24" ring will acomodate 19"+
wide inside chair frame sides $235.10

Style #18223S with 24" ring for 23"+chair frame sides
23" wide...$241.35

Style #18226S with 24" ring for 25 1/2"+ chair frame sides
25.5" wide...$255.30

Installation is accomplished by attaching a 1"x hardwood (Hard Maple or Oak is recommended) to each steel flat rail and then attaching the rail with 1"x to the chair.

An alternative installation method is to first install 2 pieces of 3/4" thick wood from front to back inside the chair. Then lay the unit down onto the installed wood and install screws.

Gross weight 30 lbs. Ships UPS or USPS-1 per carton

All GLIDERS or SWIVEL FEATURES


  • Permanently lubricated glider bushings

  • 24" diameter x 3/4" thick ring

  • Installed non-marking floor protectors

  • 10 1/4" square swivel plates 500 lb load

  • 15/16" thick ball bearing swivel

  • No plastic race (to break)

  • Max glider users weight 350 lbs.

  • 65 steel ball bearing swivel

  • Pre lubricated bearings

  • Fully assembled unit

  • Most Mount to chair screws included
HEAVY DUTY

SWIVEL GLIDER

See Glider Installation for Glider install tips
This heavy duty swivel glider is available in widths for up to chair and a half widths
HEAVY DUTY
CHAIR GLIDER
This heavy duty chair glider is for
25 1/2"+ wide framed upholstered chairs.

Style #13326 chair glider...$184.95
HEAVY DUTY
CHAIR ROCKER
for up to 20" wide chair frames
for up to 20" frames use Style #11120...$79.95

for up to 21" frames use Style #11121...$81.95

for up to 23" frames use Style #11123...$85.95

Non-marking floor glide tips
Noiseless rocking construction
Up to 350lb user weight