Knee Pivot office gas chair part replacement mechanism
Swivel Chair Replacement Parts

Office swivel Knee Pivot chair part

A high quality precision Gordon manufactured knee pivot gas mechanism which will easily handle from small to large executive office swivel, conference and board-room chairs. One lever will perform two functions. Raise and lower the gas lift cylinder and also lock the tilting action, Push/Pull if desired. Large forward knob adjusts the tilt back spring tension.

Mechanism is 7" wide and 9 1/2" long. Attaching to seat bottom at almost 6" in width and at 8 1/2" front to back. Additional hole slots will provide shorter attachment if needed. Height of mechanism is about 3 3/16" not including the spring tension adjustment knob.

  • High performance design
  • Forward and rear cushioned stops provide a quiet, dampened action ride
  • Smooth well supported travel range
  • Nylon bearings provide a smooth maintenance-free tilt action
  • Accepts all 17/4 gas lift cylinders
  • Knee pivot minimizes foot lift-off
Another Knee Pivot mech

Style #31788GKP

Style #3105GKP...$139.15